Cheap Passenger Elevator Manufacturers Introduces The Knowledge Of Using Freight Elevators
2021年11月15日Cheap Passenger Elevator Manufacturers introduces the matters needing attention when using freight elevators:
1. Must be lightly opened and lightly closed. (Prevent the door rope from coming out of the notch or breaking the door safety switch)
2. When the elevator is not stuck or malfunctions, do not touch the emergency stop switch. When the emergency stop switch is triggered, the emergency stop light or occupancy light on the elevator panel will light up. Reset the emergency stop switch until the emergency stop light or occupancy light on the elevator panel goes out.
3. Only all the hall doors of the elevator are good. Turn on the phone or use the professional OFF correctly. When it is a hall door is not closed, the elevator has abnormal door panel lights.
4. When loading and unloading goods, please place it in the middle of the car (≥5㎝ from the side of the car) to prevent the car from getting stuck.
5. After removing the cargo floor, remove the hall and close it until the call panel or door light goes out to occupy the distance to ensure the normal use of other targets.
6. When the elevator does not stop on this floor, the mechanical lock of the hall door will be automatically locked. Except for maintenance, it is not allowed to open the hall door in any way. It is strictly forbidden to short-circuit the safety control switch of the hall door, and open the hall door to let the elevator system run. If it is found that the elevator is open with the hall door and can be used according to the operating conditions, it should be stopped and used immediately, and the main power supply of the elevator and all the hall doors should be shut down and repaired in time.
7. Do not overload, specify on the call panel of the elevator operation, the weight of the cargo should be less than the carrying capacity
Through the above introduction, Black Passenger Elevator Manufacturers hopes that you can simply refer to the content of this article in future use.
www.fujihsed.com
1. Must be lightly opened and lightly closed. (Prevent the door rope from coming out of the notch or breaking the door safety switch)
2. When the elevator is not stuck or malfunctions, do not touch the emergency stop switch. When the emergency stop switch is triggered, the emergency stop light or occupancy light on the elevator panel will light up. Reset the emergency stop switch until the emergency stop light or occupancy light on the elevator panel goes out.
3. Only all the hall doors of the elevator are good. Turn on the phone or use the professional OFF correctly. When it is a hall door is not closed, the elevator has abnormal door panel lights.
4. When loading and unloading goods, please place it in the middle of the car (≥5㎝ from the side of the car) to prevent the car from getting stuck.
5. After removing the cargo floor, remove the hall and close it until the call panel or door light goes out to occupy the distance to ensure the normal use of other targets.
6. When the elevator does not stop on this floor, the mechanical lock of the hall door will be automatically locked. Except for maintenance, it is not allowed to open the hall door in any way. It is strictly forbidden to short-circuit the safety control switch of the hall door, and open the hall door to let the elevator system run. If it is found that the elevator is open with the hall door and can be used according to the operating conditions, it should be stopped and used immediately, and the main power supply of the elevator and all the hall doors should be shut down and repaired in time.
7. Do not overload, specify on the call panel of the elevator operation, the weight of the cargo should be less than the carrying capacity
Through the above introduction, Black Passenger Elevator Manufacturers hopes that you can simply refer to the content of this article in future use.
www.fujihsed.com
コメント