The choice of home elevator has many criteria, and it is not easy to choose a suitable home. Below, China Elevator Lifts Factory introduces how to choose a suitable home elevator.
1. The location determines the space of the hoistway and the size of the elevator. The middle of the stairs, the corners, and the external hangers are all fine. The hoistway space is determined according to the environment. The recommended load capacity is 3-4 people, 225-320KG, and the inner size of the car is 0.8-1.1 square meters. The relative load capacity of the area can be larger than that of the passenger elevator to increase comfort.
2. Airtight hoistway is equipped with airtight car for sightseeing on all sides or partly. It is recommended to install glass windows on the door. There are various shapes, rectangular, circular, and combination types are all possible. Firstly, consider the environmental conditions, secondly consider personal preference, and thirdly consider the cost and difficulty.
3. The general user definitely lacks elevator professional knowledge, and there is no dedicated elevator service personnel, and the safety cannot be reduced. It is best to configure it according to the passenger elevator. There are generally two ways to open the door. Automatic door and manual door. Domestic elevators on the second floor abroad have no hoistway and no door. But there must be safety measures to prevent shear collisions. It is recommended to connect the local telephone extension in the car to prevent the alarm for help when a fault is trapped.
4. In order to save area, it is recommended to adopt double-leaf automatic doors. The width of the hoistway determines the width of the car and the door opening. Generally, the hoistway width 1200MM corresponds to the car width 850MM and the door opening width is 650MM; 1350MM corresponds to 950MM and 750MM, and 1500MM corresponds to 1100MM and 800MM. The hoistway depth minus 280 is the car depth. For example, the hoistway 1200 corresponds to the car 920MM. The outer dimensions of the hoistway will be slightly larger because of the sealing material.
5. The bottom pit is for installing buffers and accommodating the bottom of the car, and the traction machine should be installed on the top floor. Some jumpers cannot dig the bottom pit, and the top floor height is 2550MM, etc., home elevators must be designed flexibly. Generally, the small pit is 150-200MM, and the bottom pit can be borrowed from the decorative ground, and then the elevator will raise a step, about 70-100MM. When the top floor is 2550MM, the height of the car is 1950MM.
6. It is recommended to use turbine and worm variable frequency speed control traction machine, automatic control of passenger elevator microcomputer board, and automatic door. Because the traction machine technology is very mature, the parts are cheap, and the worm gear reducer has a self-locking function. Even if all the brakes are broken, it is difficult to roll back and safer. The passenger elevator microcomputer board has stable performance and complete functions, and the price is not high. You can also consider attaching a power-off emergency leveling function, just in case. The contactor is of silent type. The permanent magnet synchronous traction machine has the phenomenon of slipping, so we have to prevent it.
7. In order to prevent accidents of accidentally entering the hoistway and stepping down and falling, the door must have an organic and electric interlocking function, at least it must have a mechanical lock linked with the car and an electrical switch associated with the landing door.
8. Because the floors of the family are not many and not high, it is not easy to be used by the elderly and people with mobility impairments. Two layers of 0.25M/S, 3-4 layers of 0.4M/S will do. The speed is low, the lifting force is large, and the motor power can be appropriately reduced, which saves energy and reduces noise.
9. Home elevators must pay attention to decoration. The focus of attention is to combine the style of home improvement. It is recommended that the principle of simplicity and practicality increase the highlights of home life. The interior is directly stainless steel, with glass, general ceiling lights, mirror lights, energy-saving lamps, etc. The exterior can be whitewashed or tiled with marble. It is also a good plan to install an elevator in the middle of the stairs and combine it with the stairs.
Through the above introduction, Passenger Elevator Factory hopes that you can simply refer to the content of this article in future use.
https://www.fujihsed.com/
1. The location determines the space of the hoistway and the size of the elevator. The middle of the stairs, the corners, and the external hangers are all fine. The hoistway space is determined according to the environment. The recommended load capacity is 3-4 people, 225-320KG, and the inner size of the car is 0.8-1.1 square meters. The relative load capacity of the area can be larger than that of the passenger elevator to increase comfort.
2. Airtight hoistway is equipped with airtight car for sightseeing on all sides or partly. It is recommended to install glass windows on the door. There are various shapes, rectangular, circular, and combination types are all possible. Firstly, consider the environmental conditions, secondly consider personal preference, and thirdly consider the cost and difficulty.
3. The general user definitely lacks elevator professional knowledge, and there is no dedicated elevator service personnel, and the safety cannot be reduced. It is best to configure it according to the passenger elevator. There are generally two ways to open the door. Automatic door and manual door. Domestic elevators on the second floor abroad have no hoistway and no door. But there must be safety measures to prevent shear collisions. It is recommended to connect the local telephone extension in the car to prevent the alarm for help when a fault is trapped.
4. In order to save area, it is recommended to adopt double-leaf automatic doors. The width of the hoistway determines the width of the car and the door opening. Generally, the hoistway width 1200MM corresponds to the car width 850MM and the door opening width is 650MM; 1350MM corresponds to 950MM and 750MM, and 1500MM corresponds to 1100MM and 800MM. The hoistway depth minus 280 is the car depth. For example, the hoistway 1200 corresponds to the car 920MM. The outer dimensions of the hoistway will be slightly larger because of the sealing material.
5. The bottom pit is for installing buffers and accommodating the bottom of the car, and the traction machine should be installed on the top floor. Some jumpers cannot dig the bottom pit, and the top floor height is 2550MM, etc., home elevators must be designed flexibly. Generally, the small pit is 150-200MM, and the bottom pit can be borrowed from the decorative ground, and then the elevator will raise a step, about 70-100MM. When the top floor is 2550MM, the height of the car is 1950MM.
6. It is recommended to use turbine and worm variable frequency speed control traction machine, automatic control of passenger elevator microcomputer board, and automatic door. Because the traction machine technology is very mature, the parts are cheap, and the worm gear reducer has a self-locking function. Even if all the brakes are broken, it is difficult to roll back and safer. The passenger elevator microcomputer board has stable performance and complete functions, and the price is not high. You can also consider attaching a power-off emergency leveling function, just in case. The contactor is of silent type. The permanent magnet synchronous traction machine has the phenomenon of slipping, so we have to prevent it.
7. In order to prevent accidents of accidentally entering the hoistway and stepping down and falling, the door must have an organic and electric interlocking function, at least it must have a mechanical lock linked with the car and an electrical switch associated with the landing door.
8. Because the floors of the family are not many and not high, it is not easy to be used by the elderly and people with mobility impairments. Two layers of 0.25M/S, 3-4 layers of 0.4M/S will do. The speed is low, the lifting force is large, and the motor power can be appropriately reduced, which saves energy and reduces noise.
9. Home elevators must pay attention to decoration. The focus of attention is to combine the style of home improvement. It is recommended that the principle of simplicity and practicality increase the highlights of home life. The interior is directly stainless steel, with glass, general ceiling lights, mirror lights, energy-saving lamps, etc. The exterior can be whitewashed or tiled with marble. It is also a good plan to install an elevator in the middle of the stairs and combine it with the stairs.
Through the above introduction, Passenger Elevator Factory hopes that you can simply refer to the content of this article in future use.
https://www.fujihsed.com/
コメント